Kia Picanto Key Fob Replacement Tips From The Most Effective In The Industry
How to Replace a Kia Sportage Replacement Key
For a number of Kia models, the key contains the keyless entry system that is built into the key. This key is similar to an remote control and can be exchanged with a Kia dealer.
Key fobs may stop working due to a variety of reasons, including an inactive battery, worn out buttons, signal interference or water damage. Here are some guidelines on how you can get your Kia Sportage replacement key working again.
How to replace a smartkey or remote key?
It doesn't matter if your Kia comes with an intelligent key, remote key, push-to-start key, or a regular non-transponder metal key the battery in these keys will eventually need replacing. This is especially when the car displays a message that the remote or smart key has a low battery.
This is a relatively easy process. In kia remote key fob to replace the battery in the key fob remove the mechanical key from the slit in the back of the key fob. Next, break the cover. Inside the key fob will be an incredibly small screw that holds the battery in the correct position. With a small screwdriver, take the screw off and pull out the old battery. Install the new battery and close the gap on the key fob.
Once the key fob has a fresh battery Test it by pressing the locks and unlock buttons. If the doors lock and unlock according to your expectations, then you're set! You can now utilize the hands-free lock/unlock feature on your Kia when your fingers are cold or you need to make errands in Brandon.
Note: Certain key fobs may need to be programmed (transponder chips or smart keys). This requires a particular programming machine that only the dealer or locksmith can access. Other keys (non transponder keys made of steel) don't require programming. If your keys need to be reprogrammed, you will need to be aware of the number written on the tag that identifies the key and keep it in a safe place.
How do you replace a battery?
If the Kia key fob doesn't respond to pressing the lock or unlock button, it is most likely that the battery is depleted. A low battery may cause other issues, like the check engine light coming on or the engine not working correctly. It is easy to replace key fob batteries with only some tools.
Make sure that you shut off your vehicle and close the doors before you begin. Find the small, metal or plastic piece on the bottom of the key fob. Then, jiggle it until the key comes out. The key can be put into the door's driver handle to unlock your car.
To replace the key fob battery, take off the rear cover and use a plier bar tool to remove the latch that holds the black negative battery cable. Remove the old battery and orient the new battery to ensure that the "+" positive side faces you and the "-" negative side is facing towards the fob's metallic electrical contacts. Avoid using excessive force when pushing the new CR2032 into place to avoid damaging or bending the metal contacts.
After you have installed the new battery and turning the key fob on and off in the ignition until the door locks up. You can then test your Kia key fob to determine if it is working properly again.
How to replace the smart key
You could have a standard keyfob or a Smart Key based on the model of Kia Sportage. The difference between the two is that the smart fob has tiny mechanical key blade hidden within it, whereas the standard fob doesn't. Both key fobs come with batteries that will eventually require replacement. Fortunately, it's quite simple and takes just two minutes.
Before you start it is important to ensure that you're on a level surface with enough lighting and that your Kia is off. Be aware that there are small parts inside the fob that can be removed if not vigilant.
The release button for the small size is located on the lower backside. It could be a circular or rectangular slot. You can open the key fob by pressing the button.
Once you have the key fob open and you are able to remove the old battery and replace it. The new battery should be a CR-2032, and can be purchased online or at your local auto parts store. When you're done, the key fob will allow you to lock and unlock your vehicle, even if it isn't running.
How do you replace a broken mechanical key
The Kia keyfob is a wonderful convenience which allows us to lock or unlock our car simply by pressing one button. But like any device it may have issues from time to time. Luckily, there are ways to resolve these issues and keep our key fobs in good condition for the long run.
A dead or drained battery is one of the most frequently encountered issues. The battery could cause the device to stop working or operate intermittently. If this is the case then try replacing the battery with a new one.
If this doesn't solve the issue, try using an ordinary screwdriver with a flat head to push the fob's plastic casing open. Be careful not to scratch any internal components or scratch the plastic. Once the battery is removed, replace it with a brand new one.
Close and open the door using the mechanical key. (Every kia fob comes with an emergency mechanical key which will fit into the slot). Test the fob to make sure it's functioning correctly. If the key fob isn't working, contact an expert locksmith or dealer to help solve the issue. Make sure they make you an emergency key that functions across all trunk and door cylinders to prevent lockouts in the future.